Quick selection
- WP / WG inert carrier, base
- CENSIL 260P
- Higher absorption carrier
- CENSIL 265P
- Maximum liquid pick-up
- CENSIL 280P
What does silica do in agrochemical carrier?
- Liquid absorption, powder flow and anti-caking support for WP / WG.
- Auxiliary screening for physical stability and settling control in SC formulations.
- Validation designed around the actual formulation type, recipe and process problem — no blanket substitution promises.
Who is this track for?
- WP / WG / SC formulation plants holding local registration and manufacturing licences.
- Agrochemical companies with formulation labs, production lines and QC capability.
- Customers who need to improve dust, disintegration, settling or bottle residue.
Which CENSIL grades are used for agrochemical carrier?
The same absorption gradient used on the feed track, evaluated here as an inert carrier. We only run this track with customers who already hold local registration and manufacturing licences.
We publish the selection logic, not the numbers. Data sheets are issued per enquiry so the figures match the current supplier revision and your application.
The base carrier. Start here when the liquid load is moderate and the real problem is flow and caking rather than raw absorption capacity. Widely used in vitamin and trace-element premixes and as an anti-caking aid in dry food blends.
TDS · specifications · COA on requestThe middle route. Takes more liquid than the base grade while keeping the powder free-running — the usual answer when 260P holds the load but the blend stops flowing.
TDS · specifications · COA on requestThe high-loading candidate. For choline chloride, organic acids and other demanding liquids where the target loading is the binding constraint and the powder still has to discharge evenly.
TDS · specifications · COA on requestHow do you test a silica for agrochemical carrier?
| Test dimension | What to watch | What it tells you |
|---|---|---|
| Carrier absorption | Support for the target actives and adjuvant system | Tells you formulation feasibility |
| WG disintegration | Disintegration time and dispersion | Tells you end-use performance |
| SC stability | Settling, hard sediment and bottle residue | Tells you storage stability |
| Dust and flow | Production, sieving and packing behaviour | Tells you plant operability |
Which reference brands do customers benchmark against?
Trademarks belong to their respective owners and are named for orientation only. No equivalence is claimed; fit is confirmed by your own trial.
Which grade should you start with?
We only provide inert material support around the physical stability of the formulation. Look at the formulation type, the existing recipe and the real problem first, then screen samples against it.